Enjoy the versatility of Mutoh’s line of Eco-Ultra ValueJet printers. UV-LED/ Multipurpose Print anything from yard signs to golf balls quickly and efficiently. Jan 5, 2018 - Mutoh RH2 Head Driver Board DE-35343, Compatible with Agfa Grand Sherpamatic. This board was. ValueJet 1614 - 64' Mutoh America's.

All posts and other information available at Signs 101 should be viewed as the opinion only of the poster. No claim is made that any information is accurate.

As such, each reader should not rely on any information available here as accurate and should independently verify such accuracy. In addition, no claim is made that posts made here will be free from profanity, obscenity, rude, hurtful, libelous or insulting opinions of the poster. Such posts should, however, be reported to an Administrator for review. Neither the owners, employees, officers nor directors of Signs 101 shall be held responsible or liable under any legal theory for any loss or injury resulting from any post, information made available, policy, action or lack of an action at Signs 101. Your use of this website is your acceptance of these terms and conditions of use.

A Eon Media,LLC Company Signs101 Links.

Part 1: Initial Powering of Your Printer DO NOT PUT ANY CLEANING OR INK CARTRIDGES IN THE MACHINE PRIOR TO DOING THE FOLLOWING STEPS. Plug the AC Cable directly into the wall (Preferably a dedicated circuit). This circuit must not have any appliances such as Air Conditioners, Refrigerators, Freezers, etc. It must also not be plugged into an extension cord of any kind or any type of Surge Protector or Power Strip. The machine has fuses and is protected from any power surge.

Remove the “HEAD LOCK.” 3. Remove all packing tape. Turn the Printer “ON.” 5. It will ask you to insert the Cleaning Cartridges, INSERT THE CLEANING CARTRIDGES AT THIS POINT. The HEAD WASH will now begin.

Once the HEAD WASH is completed, the Printer will then ask you to insert The Ink Cartridges, Insert the INK CARTRIDGES now. The Printer will now do an INK FILL. Once the machine has completed the “INK FILL”, Turn the machine “OFF.” 9.

Insert Media, and lower the “Media Rollers.” 10.Turn on the printer. It will now sized the media and indicate (in Millimeters) the width of the media. 12.You must press “ENTER” at this point to accept the media size. The Printer should now indicate “READY TO PRINT.” Part 2: Configuring the IP Settings. The Printer 1.

The printer indicates “READY TO PRINT.” 2. Press the “MENU” button. Using the “RIGHT” arrow button scroll right once. Using the “DOWN” arrow button scroll down to “IP ADDRESS.” 5. Press “ENTER.” 6.

Configure the address to 172.018.003.101 7. Press “Enter” to save this setting.

Press “CANCEL” one time. Using the “DOWN” arrow button scroll down once to “SUBNET MASK.” 10. Proshivka chipov xerox 6000 series. Press “ENTER.” 11. Configure the Subnet Mask to 255.255.255.000 12. Press “Enter” to save this setting. Press “CANCEL” all the way back to “READY TO PRINT.” The Computer 1.

On your computer go to “START” then “CONTROL PANEL” then “NETWORK CONNECTIONS.” 2. Locate the “Local Area Connection” that you have your Printer connected to using a “CROSS-OVER” Ethernet Cable. “RIGHT CLICK” on the that “Local Area Connection” and scroll down to “Properties” and left Click. Scroll down to “Internet Protocol (TCP/IP)” and highlight it. Then click on the “Properties” button. Put a “DOT” in beside the term “Use The Following IP Address.” 6. Now enter the IP Address “172.018.003.100” 7.